A static var compensator (SVC) is power-electronic or switched-capacitor equipment that regulates reactive power to support voltage on AC networks. This guide focuses on practical evaluation steps for U.S. industrial and commercial buyers—measurement, documentation, and lifecycle support—not generic marketing claims. Where equipment selection is involved, cross-check public specifications on cnbygele.com and confirm project-specific limits with your utility or consulting engineer. Section checklists can be reused as RFQ attachments and commissioning handover outlines.
Part 1. Core Function
SVC equipment supplies leading or lagging reactive power to maintain voltage within acceptable bands.
Power quality projects succeed when measurement, design, and procurement stay aligned across owner, consultant, and panel builder roles.
Document nominal voltage, available fault level, and ambient conditions before final equipment selection.
Use conservative language for performance claims until site-specific studies confirm targets.
Capture nameplate data, single-line drawings, and utility interconnection rules in the RFQ package to reduce back-and-forth during technical review.
If your site mixes linear motors and nonlinear electronics, treat harmonic and reactive targets as linked requirements rather than separate purchases.
Define acceptance criteria before shipment—power factor, step response, or THD at agreed load points—so commissioning disputes are less likely.
Part 2. Common Implementations
Modern plants often deploy static var generators (SVG) for continuous control.
Compare total installed cost including reactors, controllers, enclosures, and commissioning—not equipment list price alone.
Internal links to SVG product line, low-voltage capacitor banks, and active harmonic filters help buyers navigate related product categories on cnbygele.com.
Lead times and MOQ vary by configuration; confirm in quotation for export shipments.
Capture nameplate data, single-line drawings, and utility interconnection rules in the RFQ package to reduce back-and-forth during technical review.
If your site mixes linear motors and nonlinear electronics, treat harmonic and reactive targets as linked requirements rather than separate purchases.
Define acceptance criteria before shipment—power factor, step response, or THD at agreed load points—so commissioning disputes are less likely.
| Type | Technology | Speed |
|---|---|---|
| TCR/TSC | Thyristor switched | Fast |
| SVG | IGBT-based | Very fast |
| Mechanical switched caps | Contactors | Stepwise |
Part 3. Application Examples
Steel mills, ports, commercial buildings with elevators, and solar/wind interconnection points benefit from SVC support.
Post-commissioning, schedule periodic verification of power factor, THD, and temperature rise at key buses.
Keep spare fuses, contactors, or modules identified in the maintenance plan.
Submit project parameters via CNBYG contact for engineering feedback on fit and documentation.
Capture nameplate data, single-line drawings, and utility interconnection rules in the RFQ package to reduce back-and-forth during technical review.
If your site mixes linear motors and nonlinear electronics, treat harmonic and reactive targets as linked requirements rather than separate purchases.
Define acceptance criteria before shipment—power factor, step response, or THD at agreed load points—so commissioning disputes are less likely.
Part 4. Documentation and Handover Checklist
Industrial acceptance should not rely on energization alone—documentation proves ratings, safety, and maintainability for the next maintenance cycle.
Use the tables below as a starting RFQ checklist; your utility or EPC contract may require additional items.
For product-specific datasheets, cross-check related CNBYG product pages and request any missing type test excerpts.
Align factory acceptance tests with items your insurer or utility interconnection agreement may require.
When comparing quotations, normalize currency, Incoterms, and included commissioning services before ranking suppliers.
| Document / item | Purpose | When to request |
|---|---|---|
| Factory type test report | Verify rated voltage, kvar, and temperature rise | Before purchase order |
| Single-line diagram template | Panel layout and protection coordination | Design phase |
| Communication register map | BMS/SCADA integration | Before FAT/SAT |
| Spare parts list (5+ year) | Lifecycle planning | Contract negotiation |
| Commissioning checklist | Acceptance testing | Before energization |
| Application | Load behavior | Typical approach |
|---|---|---|
| Welding / crane halls | Fast reactive swings | SVG or hybrid dynamic compensation |
| Data center UPS | Mixed harmonic + reactive | Study first; may combine APF + controlled compensation |
| Renewable coupling | Variable generation | Coordinate with inverter settings and grid code |
| Stable motor plant | Moderate step loads | Capacitor bank + controller may suffice |
Part 5. Commissioning, Monitoring, and Long-Term Operations
Commissioning should verify that reactive and harmonic targets are met at the point of common coupling, not only at the compensation cabinet terminals.
Functional tests typically include step response, power factor at defined load points, and harmonic readings compared to contract or IEEE 519 guidance where applicable.
Monitoring after energization helps catch hunting, unexpected resonance, or capacitor cell failures before they affect production uptime.
Train maintenance staff on lockout/tagout, discharge timing for capacitors, and which alarms require immediate shutdown versus scheduled service.
Schedule a post-warranty review to reassess load changes—production line upgrades often change compensation needs within three to five years.
Utility account managers can clarify whether PF adjustments affect demand charges only, energy charges, or both—align KPIs before writing acceptance tests.
Keep a spare-parts criticality list (fuses, contactors, fan assemblies, control boards) based on lead time and production impact, not catalog defaults alone.
Recommended CNBYG Products
For project support, explore our related product line, power quality system options, and OEM/ODM capabilities on cnbygele.com.
FAQ
What is a static var compensator?
A static var compensator (SVC) is a shunt-connected FACTS device that regulates voltage by injecting or absorbing reactive power. It behaves as an automated variable impedance that brings the system closer to unity power factor.
What are the main types of SVC?
The two common types are FC-TCR (fixed capacitor with thyristor-controlled reactor) and TSC-TCR (thyristor-switched capacitor with thyristor-controlled reactor). TSC-TCR is more flexible, needs a smaller reactor, and generates fewer harmonics.
Where are static var compensators used?
Two main settings: connected to the power system to regulate transmission voltage, and near large industrial loads (such as arc furnaces, rolling mills, and railway feeds) to improve power quality and reduce flicker.
How does an SVC compare to a STATCOM in cost?
Educational references note that an SVC generally costs less than a STATCOM. However, a STATCOM (or SVG) is inverter-based and holds output better at low voltage, so the choice depends on dynamic performance needs.
Where should an SVC be located?
Placement affects effectiveness; references recommend locating an SVC at the load center or the midpoint of a transmission line to best support voltage.
What is the difference between transmission and industrial SVC?
A transmission SVC regulates grid voltage on high-voltage networks, while an industrial SVC is installed near large loads to improve local power quality. The topology is similar but ratings and connection differ.
Does an SVC generate active power?
No. It manages reactive power to support voltage and power factor; active power still comes from the grid or local generation.
References
- Wikipedia — Static VAR compensator
- ElectricalWorkbook — Static VAR Compensator types & advantages
- ScienceDirect — Static Var Compensators (topic)
- FACTS Module-3 (academic PDF)
Ready to discuss your project? Contact CNBYG engineering support with your voltage class, load list, and target power factor or THD goals.
